Contact us now on
+44(0)1775 680881

Our telephone lines are open
Monday to Thursday 8.45am to 5.30pm
and Friday 8.45am to 5.00pm
Except for lunch 12.30pm - 1pm and all public holidays.

View ALL Parts

x
x
Always popular, we are the official UK importer of these high quality screens made in France. Made by Secdem we believe that they present excellent value for money. All are made of clear thick high quality perspex. We aim to maintain stocks of these clear screens at all times.
[Click heading for more details]
These highly acclaimed stands are an improvement on the original. The original stand can be retained.   * The SUREFOOT sidestand uses your original footpeg for 91690 & 91692 stands, therefore we require your left footpeg (less rubber) in exchange. Alternatively for UK customers we can despatch the SUREFOOT stand directly from stock subject to a 28.20 deposit, refundable on receipt of your old footpeg. NOTE: EXCHANGE ...follow link for full description
[Click heading for more details]
per caliper
[Click heading for more details]
NOT PARALEVER R80 & R100 MACHINES
[Click heading for more details]
All the spares and parts you need for your 2v Twin and K models.
[Click heading for more details]
COMPLETE KITS WITH ALL THE PARTS REQUIRED TO OVERHAUL BOTH CYLINDER HEADS. COMPRISING OF :- 2 INLET VALVES, 2 EXHAUST VALVES, 4 VALVE GUIDES, 4 GUIDE CIRCLIPS, 4 VALVE SPRINGS, 8 VALVE COTTERS (4 pairs) (100% ORIGINAL) But include Valves and Guides made by AE and ELCO. THE KIT INCLUDES ELCO STANDARD VALVE GUIDES, HOWEVER, IF YOU WANT TO HAVE ELCO HIGH TEMPERATURE VALVE GUIDES INSTEAD 8.50 (+ VAT FOR EEC) WILL BE ADDED TO THE INVOICE ...follow link for full description
[Click heading for more details]
All the parts required for a complete overhaul. 10150/10155 Consist of timing chain, Tensioner, Spring, Circlip, Cover Oil Seals (x2), Cover Gaskets(x3). 10160 Consists of above but with Fixed Slipper Rail. 10165/67/70 Consists of Timing Chain, Upper Slide Rail, Vertical Guide Rail, Cover Oil Seal, Lower Plastic Tensioner Strap.
[Click heading for more details]
WITH THE END OF LEADED PETROL, ALL BMW'S PRIOR TO 1985 WILL EVENTUALLY REQUIRE CYLINDER HEAD CONVERSION FOR CONTINUOUS LEAD FREE USE. THIS WILL HALT THE VALVE SEAT RECESSION AND RESULTING DAMAGE TO THE TOP END THAT WILL EVENTUALLY RESULT AFTER HIGH SPEEDS AND PROLONGED USE ON LEAD FREE FUEL. THIS NEW PETROL BURNS AT A HIGHER TEMPERATURE AND ABSENCE OF LEAD DEPRIVES THE SEAT/VALVE INTERFACES OF ESSENTIAL LUBRICATION. FORTUNATELY, THE SOLUTI ...follow link for full description
[Click heading for more details]
K SERIES DRIVESHAFT SPLINE REPLACEMENT A known weak point of the K series before adoption of the paralever design was rapid wear on the output shaft splines that mate with the bevel drive. In 1986 BMW increased the number of teeth from 16 to 20 to give a greater surface area, however this did not entirely overcome the problem. We now provide a repair service for K`s with single shafts where the bevel end splines are replaced with a harder 20 toot ...follow link for full description
[Click heading for more details]
We have specially sourced these tools mainly from Germany to offer you very comprehensive kits of the same quality if not higher than the original at an extremely affordable price. We are so confident that you will be completely satisfied that we pledge a 100% refund if they fail to meet your expectations(*).All tools cover the same combinations as the standard tools. All kits are supplied in a tough sectional tool roll. Appropriate fuses are inc ...follow link for full description
[Click heading for more details]
STAINLESS STEEL BOLTS TO HEATED GRIPS.
[Click heading for more details]
TOOL KITS TO WINDSCREENS
[Click heading for more details]
ALL PARTS ARE 100% NEW UNLESS STATED. All prices exclude delivery & VAT @ 20% where applicable. These offers are not subject to `special` discounts or `sales` discounts. Please note all items on this page come with 1 year standard guarantee,  Except for Engines , Gearbox , Final drive or Instruments which come with 3 month guarantee.
[Click heading for more details]
All batteries (except GEL) are sent `dry charged` without acid. We are not allowed to send acid through the post. However, for batteries that are collected we have an acid filling service. GEL filled batteries are ready to fit.All batteries left completely discharged will die within days. Please ensure that they are maintained in a good state of charge over the winter months to preserve your guarantee and peace of mind.All dry - charged batteries ...follow link for full description
[Click heading for more details]
These top quality two piece engine bars are specially imported by us from West Germany. They are made by a long time supplier of original equipment to BMW and represent excellent value for money. All come complete with fitting kit and are finished in chrome. Regrettably Engine Bars for twin RS/RT and 1985 on twins are no longer available. See photo
[Click heading for more details]
We stock intervalve valves. These are high quality Swiss engineered products which are used as standard in all Ferrari cars. They have been approved for use in the latest BMW motorcycle engine. The quality and looks are as original whilst presenting a considerable saving in price.
[Click heading for more details]
These filters have the same specifications as the originals. High pressure plastic injection moulding has been used to keep the original appearance. Manufactured and imported exclusively for MOTO-BINS under the "REISEN" label they represent a very worthwhile saving.
[Click heading for more details]
These contain the same parts as the kits on the previous page but utilize the oil filter made by DONIT. They have the same specification at a considerable saving.
[Click heading for more details]
COMPLETE KITS WITH ALL THE PARTS REQUIRED TO OVERHAUL BOTH CYLINDER HEADS. COMPRISING OF :- 2 INLET VALVES, 2 EXHAUST VALVES, 4 VALVE GUIDES, 4 GUIDE CIRCLIPS, 4 VALVE SPRINGS, 8 VALVE COTTERS (4 pairs) (100% ORIGINAL) But include Valves and Guides made by Swiss Manufacturers Intervalve and ELCO. THE KIT INCLUDES ELCO STANDARD VALVE GUIDES, HOWEVER, IF YOU WANT TO HAVE ELCO HIGH TEMPERATURE VALVE GUIDES INSTEAD 9.00 (+ VAT FOR EEC) WILL BE ...follow link for full description
[Click heading for more details]
Aluminium. These top quality "Exclusive" panniers have been designed for the adventure motorcyclist who anticipates the occassional trip off the beaten track, but which also look stylish in town. The "Exclusive" range have a smart matt aluminium finish which is slightly ribbed. Matching top boxes are available, with built in handles that can be deployed as anchors for luggage straps. Each box is lined with one cm thick polystyrene to help protect ...follow link for full description
[Click heading for more details]
For those BMW owners who are planning trips to distant places and are expecting rough trails or for those who want tough looking metal panniers/top box we strongly recommend the "EXPEDITION" range. These are made from 1.5 mm thick aluminium. The range includes a 45 litre pannier and matching 35 litre top box. This could be substituted with the 45 litre top box from the "Exclusive range" to give a huge 135 litre secure carrying capacity. Again 38  ...follow link for full description
[Click heading for more details]
For accessories & battery charging
[Click heading for more details]
We can expertly re-bore your old barrels (pre 1981) for any of the above pistons. Price 22 (24.67incl VAT) + 4.50 (5.28) P&P per barrel. (ref 50310) Please send your old barrels & specify pistons required. Turn around time 5-7 days.EXPERT EXTEND BARREL BLASTING 12 (14.10 incl VAT) PER BARREL
[Click heading for more details]
ALL BATTERIES CARRY 1 YEAR WARRANTY. Please contact our sales dept. in case of failure within warranty period on 01775-680881. All dry charged batteries are SUPPLIED WITHOUT ACID, FILL WITH BATTERY ACID BEFORE USE. All dry - charged batteries will benefit from a refresher charge before installation. This is a necessity for all Gel batteries. UK MAINLAND ONLY. DELIVERY PRICE 5.95 +VAT (6.99 inc vat). (Ignore delivery price on order form)
[Click heading for more details]
With the demise of Koni we looked at stocking various other makes. One of those was Betor. They are well known in Spain, where they are made and are known for combining quality at an affordable price.
[Click heading for more details]
Rapid wear on the output splines of the crown wheel that drives the rear wheel has been the Achilles Heel of rear bevel drives until the introduction of the R80GS/ST and the remaining 2v twins after 1985. We offer a service to UK CUSTOMERS ONLY that completely replaces these splines with a new unit that is precisely welded in place of the worn one. These are made of hardened steel and provided they are kept lubricated with (95800) LM 47 grea ...follow link for full description
[Click heading for more details]
Kits contain all Oil seals, Gaskets, O Rings & Crush Washers for a rebuild.
[Click heading for more details]
PER CON ROD (2 SHELLS)
[Click heading for more details]
* NOT R50/5. R60/5/6/7
[Click heading for more details]
NB: UK MAINLAND CARRIAGE PER PAIR/SET OF PANNIERS 10.00 Excl VAT. 11.75 Incl VAT. BRITISH ISLANDS 20.00 Excl VAT. 23.50 Incl VAT. UK CARRIAGE PER TOP BOX AND/OR ENGINE/FRAME PROTECTION BARS IS 10.00 Excl VAT. 11.75 Incl VAT. DISREGARD THE DELIVERY CHARGES SHOWN ON THE FINAL ORDER FORM.
[Click heading for more details]
With fasteners.
[Click heading for more details]
Contains exploded diagrams in order of assembly with all BMW part numbers.Discover parts that you never knew existed previously. A fascinating dictionary for the enthusiast and an invaluable aid to ordering parts.
[Click heading for more details]
(Paperbacks) All the technical details and specifications that you need to know with in depth coverage of repairs. Bibles of BMW knowhow. (Most late models only available on CD now)
[Click heading for more details]
6" x 2.45" (Add VAT to these)
[Click heading for more details]
Metal screw in seat plates are no longer available.
[Click heading for more details]
40 REQUIRED FOR WHEEL
[Click heading for more details]
(Requires Windows 95/98/XP) All CDs are in English, German, French, Dutch, Italian & Portuguese
[Click heading for more details]
Please note: Books are not subject to VAT. CLICK 'More Info' TO READ A SNIPPET ABOUT THE BOOK AND SEE THE COVER PICTURE. IDEAL CHRISTMAS OR BIRTHDAY PRESENTS
[Click heading for more details]
Completely reconditioned, these starters work and look like new units. Fully guaranteed for 12 months. Exchange units can be sent out before receipt of your faulty one subject to a 105.75 inc.vat  refundable deposit. Exchange service covers electrical faults and worn parts. (FOR SALE TO UK CUSTOMERS ONLY) VALEO UNITS NOT ACCEPTED IN EXCHANGE.
[Click heading for more details]
Electronic Ignition is now standard on almost all new vehicles. It offers better starting, improved fuel economy and lower emissions. Boyer Bransden have been manufacturing electronic ignition systems for over 20 years. These systems eliminate the use of points. A common problem on pre 1979 BMW`s is wear to the automatic advance retard mechanism cam that actuates the points. This causes incorrect retardation and timing. The Boyer Bransden units o ...follow link for full description
[Click heading for more details]
* SEPARATE NIPPLES ENCLOSED
[Click heading for more details]
A NOTE ON "FLOATING DISCS" - Allowing the discs to `float` requires a gap to be left between the brake disc and the floating bobbins. With each brake application they collide which results in fairly rapid wear to both components. Depending on the wear the bobbins can be replaced on their own. We have commissioned Italian brake experts, Grimeca, to manufacture steel bobbins with a black finish that will last much longer than the alumini ...follow link for full description
[Click heading for more details]
NOTE: BRAKE PADS SOLD PER CALIPER SET. IF YOU WANT PADS FOR 2 DISCS THEN ORDER * 2
[Click heading for more details]
A NOTE ON "FLOATING DISCS" - Allowing the discs to `float` requires a gap to be left between the brake disc and the floating bobbins. With each brake application they collide which results in fairly rapid wear to both components. Depending on the wear the bobbins can be replaced on their own. We have commissioned Italian brake experts, Grimeca, to manufacture steel bobbins with a black finish that will last much longer than the aluminium original ...follow link for full description
[Click heading for more details]
STAINLESS STEEL AND RUBBER HOSES For many years now we have been supplying a range of original rubber brake hoses directly from BMW`s own manufacturer. The equivalents in stainless steel have also been very popular. Braided stainless steel hoses give better braking due to their lower volumetric hose expansion under pressure as well as enhancing the looks and value of your pride and joy. All hoses expand to a certain extent but these PTFE stainles ...follow link for full description
[Click heading for more details]
See "BRAKES" for more Brake Switch parts.
[Click heading for more details]
NOTE: BRAKE PADS SOLD PER CALIPER SET. IF YOU WANT PADS FOR 2 DISCS THEN ORDER * 2
[Click heading for more details]
Top quality 100% asbestos free pads. The favourite choice! (PER DISC) NOTE: BRAKE PADS SOLD PER CALIPER SET. IF YOU WANT PADS FOR 2 DISCS THEN ORDER * 2
[Click heading for more details]
NOTE: BRAKE PADS SOLD PER CALIPER SET. IF YOU WANT PADS FOR 2 DISCS THEN ORDER * 2
[Click heading for more details]
Optimum quality imported specially from Europe 100% Asbestos free.
[Click heading for more details]
NOTE: BRAKE PADS SOLD PER CALIPER SET. IF YOU WANT PADS FOR 2 DISCS THEN ORDER * 2
[Click heading for more details]
SPORTS CAMSHAFT 1970-78 MODELS ARE NO LONGER AVAILABLE (NLA) FROM BMW
[Click heading for more details]
(32mm 1970-78 NO LONGER AVAILABLE)
[Click heading for more details]
*CABLES SUPPLIED WITH RUBBER BOOT FOR CARBURETTOR END ADJUSTER
[Click heading for more details]
PANNIER 69830B HAVE CUT OUTS FOR PASSENGER RAIL AND FITS TO 1973-84 OEM BMW PANNIER FRAMES OR FROM OUR HEPCO & BECKER LIST 69712 OR 69699C. Capacities are shown per pannier.
[Click heading for more details]
WHITE NUMERAL CLOCK IS NO LONGER AVAILABLE.
[Click heading for more details]
REPLACE CLUTCH BOLTS EVERY STRIP DOWN
[Click heading for more details]
6 Required. Replace every stripdown
[Click heading for more details]
All plates are Asbestos free.
[Click heading for more details]
Very comprehensive books from USA covering all areas in depth as well as fault finding & routine maintenance. Less than an hour of dealer workshop time saved will cover the cost!
[Click heading for more details]
After careful re-assessment of UK made seats we are now buying these which meet the same standards as the original but which are much more affordable. We have retained some of the BMW OE seats to complete the range. Seats are highly visible and much more prone to "wear and tear" than most other parts. Whilst we will keep to our guarantee against faulty materials and workmanship, after 12 months some "wear and tear" can be expected. Replacement se ...follow link for full description
[Click heading for more details]
THE KIT INCLUDES ALL ENGINE OIL SEALS AND GASKETS
[Click heading for more details]
Includes Bearings, Seals, Spacers etc but not discs. Other wheels can be ordered. Waiting time 3-5 weeks. Large savings on normal dealer prices. Contact sales@motobins.co.uk for more information.
[Click heading for more details]
Bulbs not included
[Click heading for more details]
Matching locks with interchangeable keys.
[Click heading for more details]
(Supplied with beading). Sourced from our screen manufacturer in France these kits give very good weather protection. The "Pullman" and "Roadster" are secured in 4 places to the handlebars and headlight brackets with a fixing kit included in the price. The "Ranger" screen being smaller is similary fixed in 3 places. All screens are made from thick clear Perspex. Dimensions at highest and widest points (to nearset inc ...follow link for full description
[Click heading for more details]
These kits comprise of just about every external fastener on the bike. They will not only enhance the looks of your pride and joy but they will add value and make servicing easier. We are so confident that you will like these kits that we offer a complete refund of the cost in the unlikely case that you are not satisfied with it. See photo of 19643SDI for a typical content.
[Click heading for more details]
N.B ALL PLUGS SUPPLIED WITH CORRESPONDING CRUSH WASHERS
[Click heading for more details]
Give new life and economy to your engine by replacing those worn valves and guides. Dramatically reduces the risk of "dropping a valve". COMPLETE KITS WITH ALL THE PARTS REQUIRED TO OVERHAUL BOTH CYLINDER HEADS. COMPRISING OF :- 2 INLET VALVES, 2 EXHAUST VALVES, 4 VALVE GUIDES, 4 GUIDE CIRCLIPS, 4 VALVE SPRINGS, 8 VALVE COTTERS (4 pairs). valve kit no (using 100% original parts) THE KIT INCLUDES  ORIGINAL BMW VALVE GUIDES, HOWEV ...follow link for full description
[Click heading for more details]
Change Big End Bolts every stripdown
[Click heading for more details]
The majority of cables are made in U.K. by Venhill Engineering. Heavy Duty Bowden cable is used as well as self lubricating nylon linings for long life and smooth operation. No oiling is required. These cables exceed the original specification.
[Click heading for more details]
WHEN ORDERING CONTROL CABLES PLEASE QUOTE VIN (FRAME) NUMBER ON ORDER FORM
[Click heading for more details]
Crown and pinion gears are only available in matched sets. Ratios are stamped near the driveshaft oil filler and are also indicated by the speedometer code. All gear sets can be interchanged to alter final gearing but if doing so you should also make a corresponding change to the speedometer.
[Click heading for more details]
* NOT R50/5. R60/5/6/7 These high quality diaphragms are used by ROVER and are approved by SAAB. Made from Hydrin they last longer than Nitrile ones and are equivalent to the originals.
[Click heading for more details]
N.B ALL PLUGS SUPPLIED WITH CORRESPONDING CRUSH WASHERS
[Click heading for more details]
All plugs supplied with corresponding crush washers.
[Click heading for more details]
Made exclusively for us by a leading German valve guide manufacturer. These guides are made to withstand the higher cylinder head temperatures generated by the use of lead free petrol. Valve guide life will be extended with the use of all fuels.
[Click heading for more details]
Made exclusively for us by ELCO. These have the same specification as the original guides but at a considerable saving.
[Click heading for more details]
All dry charged batteries are SUPPLIED WITHOUT ACID, FILL WITH BATTERY ACID BEFORE USE. All dry - charged batteries will benefit from a refresher charge before installation. This is a necessity for all Gel batteries. UK MAINLAND ONLY DELIVERY. PRICE 5.95 +VAT (6.99 INC VAT). (Ignore delivery price on order form)
[Click heading for more details]
All dry charged batteries are SUPPLIED WITHOUT ACID, FILL WITH BATTERY ACID BEFORE USE. All dry - charged batteries will benefit from a refresher charge before installation. This is a necessity for all Gel batteries. UK MAINLAND ONLY. DELIVERY PRICE 5.95 +VAT (6.99 inc vat). (Ignore delivery price on order form)
[Click heading for more details]
(All plugs supplied with corresponding washer). See appropriate section for gearbox, bevel & driveshaft plugs & washers.
[Click heading for more details]
(R50/5, R75/5, R75/6, R60/5, R100/7 R100S emblems are no longer available)
[Click heading for more details]
WE REQUIRE YOUR FAULTY GEARBOX IN EXCHANGE BEFORE POSTING OUT THE RECONDITIONED UNIT. ( PLEASE NOTE YOU BOX MUST NOT HAVE ANY DANAGE TO THE CASING ) DRAIN GEAR OIL BEFORE SENDING TO MOTOBINS LTD. INSURE THE GEARBOX WITH THE POST OFFICE/COURIER. FILL THE RECONDITIONED GEARBOX TO THE CORRECT LEVEL WITH THE CORRECT OIL BEFORE USE. ( PLEASE NOTE WE CAN NOT OFFER THIS SERVICE OUTSIDE THE UK )
[Click heading for more details]
Stainless Steel
[Click heading for more details]
BMW factory originals. Left & Right
[Click heading for more details]
NOTE: Early R80/85 up to 10/1985 have only 88716 Gasket
[Click heading for more details]
100% Original
[Click heading for more details]
All the spares and parts you need for your F650
[Click heading for more details]
Self adhesive stickers.
[Click heading for more details]
Featherlight clutch cables provide the ultimate smooth delivery and clutch action. The high technology teflon lines and super smooth marine grade stainless steel inner combine to provide the lightest of actions. PTFE is "self lubricating" and requires no oiling.
[Click heading for more details]
These cables have the same qualities as the Featherlight clutch cables. We stock Featherlight throttle cables for all of the above applications except for OE cables. To obtain our part number please add an "F" to the end of the above numbers (eg the K100RT/LT Featherlight throttle cable has part number 35465F)
[Click heading for more details]
NOTE: BRAKE PADS SOLD PER CALIPER SET. IF YOU WANT PADS FOR 2 DISCS THEN ORDER * 2
[Click heading for more details]
These oil filters are manufactured by DONIT who are a long standing supplier of original oil and air filters to BMW. They are made to the same specification as the originals and are identical in performance whilst presenting a considerable saving.
[Click heading for more details]
Change flywheel bolts every stripdown.
[Click heading for more details]
NB 1974-80 REFLECTORS ARE NO LONGER AVAILABLE
[Click heading for more details]
NOTE: FORK SEALS ARE SUPPLIED AS A PAIR FOR 2 LEGS UNLESS STATED.
[Click heading for more details]
Your pitted/worn stanchions exchanged for expertly machine milled and hard chrome plated ones. (one year guarantee) If you want value for money these exchange stanchions are the number one choice. We believe the quality is higher than the original. Of the many that are sent out every year we have never had a returned pitted or corroded one returned in over 15 years. We are happy to supply these EX-STOCK before receiving your old ones (subject to  ...follow link for full description
[Click heading for more details]
Set of 33 parts to completely overhaul the front forks of all 1970-80 models.Includes Aeroshell 4 fork oil.
[Click heading for more details]
FOR 93901, USE 2 X 93909 SPACERS, AND 4 X 60590 HOSECLIPS (0.80 ea)
[Click heading for more details]
* REPLACE THESE PARTS EVERY STRIP DOWN
[Click heading for more details]
THE FOLLOWING CONTINUOUS ROAD SPEED RATINGS APPLY:- S = UP TO 113mph, T = UP TO 118mph, U = UP TO 124mph, H = UP TO 130mph, V/VR = OVER 130mph, ZR = OVER 150mph. (TUBE) = TUBE MUST BE USED WITH THIS TYRE.UK CARRIAGE RATES FOR 1 TYRE = 5.00 (5.87 INC VAT), FOR 2 TYRES 5.95 (6.99 INC VAT)
[Click heading for more details]
Don`t jeopardize your hard work - renew seals/gaskets every strip down.
[Click heading for more details]
* Retrofits all 1981-84, original linkage, linkage clamp and rubber bellows are no longer available
[Click heading for more details]
All plugs supplied with corresponding crush washers.
[Click heading for more details]
26610 BEARING KIT INCLUDES THE INPUT BEARING SLEEVE (see photo), WHICH BEARS THE ENTIRE INPUT LOAD AND SO IT IS PRONE TO WEAR. SOME CUSTOMERS FIND IT CHEAPER NOT TO REPLACE IT, BUT THIS IS FALSE ECONOMY IN THE LONG RUN.
[Click heading for more details]
DUE TO THE INACCESSABILITY OF THE 12 VOLT BATTERY ON SOME MACHINES, BMW HAVE MADE AVAILABLE A GELL FILLED BATTERY. THESE PERMANENTLY SEALED AND MAINTENANCE FREE. THE GEL INSIDE ACTS AS THE ELECTROLITE. THESE BATTERIES CAN BE USED INPLACE OF 79508 & 79519. All dry - charged batteries will benefit from a refresher charge before installation. This is a necessity for all Gel batteries. UK MAINLAND ONLY. DELIVERY PRICE 5.95 +VAT (6.99 inc vat). ...follow link for full description
[Click heading for more details]
Karcoma and Germa taps are interchangeable but the rebuild kits are different. Karcoma are the most common and have "Karcoma" inscribed on the back, Germa taps have "Germa" inscribed on the levers. We stock individual Germa parts. Please enquire for details.
[Click heading for more details]
THE GOBI SYSTEM CARRIES 37LTR PER PANNIER PLUS 3.5LTR OF FLUID IN THE SIDE WALLS OF EACH PANNIER. FINISHED IN AN ALU COLOUR PLASTIC, WITH TAPS AND LUGGAGE HOOK & ACCESSORIES AVAILABLE TO ENHANCE THE PANNIERS. VISIT www.hepco-and-becker-luggage.co.uk TO SEE THE PANNIERS.
[Click heading for more details]
We are proud to offer these replacement brake discs made by Grimeca, one of Italy`s largest and most respected brake manufacturers.They supply OE to the likes of Ducati, Aprilia, Yamaha and Laverda. Exceptional attention to detail has been used in the manufacture of these discs which come complete with the high pressure cast hub ready to bolt straight on to your wheel. The stainless steel used has the same braking characteristics as that used on  ...follow link for full description
[Click heading for more details]
We have been asked many times to provide the parts to replace the ATE master cylinder situated underneath the petrol tank on 1976-80 models for a handlebar mounted master cylinder as found on later models. This gives wore positive braking as it eliminates the brake cable which always has a tendency to stretch. The kit comprises of a complete right hand throttle assembly with combined master cylinder, upper stainless steel brake hose and a drilled ...follow link for full description
[Click heading for more details]
Four way indicator. * ENABLES ALL FOUR INDICATORS TO FLASH AT THE SAME TIME WHILST YOU ARE MOVING OR STATIONARY. THESE ORIGINAL BMW KITS COMPRISE OF ALL THE NECESSARY COMPONENTS, WIRING & HARDWARE TO ADD THIS VALUABLE SAFETY FEATURE. FITTING IS EASY AND FULL INSTRUCTIONS INCLUDED.
[Click heading for more details]
Original W. German
[Click heading for more details]
Dips on left for UK roads.
[Click heading for more details]
We stock these frames made by Hepco & Becker to mount their luggage to the range of BMW`s. If the item is described as LUGGAGE FRAMES a rear top box mounting rack is included with the pannier side frames to which a Hepco top box can be fitted. If the item is described as REAR RACK STAND ALONE this means that this is only a rear top box mounting rack that can take a Hepco Top Box. If the item is described as PANNIER FRAMES then these are for p ...follow link for full description
[Click heading for more details]
For photos see the specific parts with a camera icon or go to www.hepco-and-becker-luggage.co.ukPlease feel welcome to visit our shop to look at these systems, we have tried to describe and picture them accurately - however seeing is believing we try to maintain all items in stock - but please phone first to avoid disappointment. Hepco & Becker are the leading manufacturers in Germany for motorcycle luggage and engine/bodywork pro ...follow link for full description
[Click heading for more details]
MOTOBINS ARE PROUD TO BE THE OFFICIAL HEPCO & BECKER EQUIPMENT IMPORTER IN THE BRITISH ISLES. UK. (BEWARE OF NON OFFICIAL DEALERS WHO ARE UNABLE TO BACK UP WARRANTY CLAIMS AND GET THE SPARE PARTS YOU NEED) MOTOBINS CAN SUPPLY PANNIERS, TOP BOX'S MOUNTING FRAMES AND ENGINE PROTECTION BARS ETC. FOR MOST MAKES AND MODELS OF MOTORCYCLE (i.e.  BMW, MODERN MOTO GUZZI, APRILIA, TRIUMPH ETC.) Note: Th ...follow link for full description
[Click heading for more details]
These protection bars provide a very high level of defence against accidental damage. Finished, unless contrary stated, in plastic coated gloss back they represent very good value for money, especially when compared with the BMW originals. All mounting hardware and fasteners are provided. 'TO PROLONG THE LOOKS OF CHROME FINISHED ITEMS, THEY WILL BENEFIT FROM THE OCCASIONAL POLISH USING SOLVOL AUTOSOL'
[Click heading for more details]
These protection bars provide a very high level of defence against accidental damage. Finished, unless contrary stated, in plastic coated gloss back they represent very good value for money, especially when compared with the BMW originals. All mounting hardware and fasteners are provided. 'TO PROLONG THE LOOKS OF CHROME FINISHED ITEMS, THEY WILL BENEFIT FROM THE OCCASIONAL POLISH USING SOLVOL AUTOSOL'
[Click heading for more details]
For photos see the specific parts with a camera icon or go to Please feel welcome to visit our shop to look at these systems. We have tried to describe and picture them accurately - however, seeing is believing. We try to maintain all items in stock, but please phone first to avoid disappointment. Hepco & Becker are the leading manufacturers in Germany for motorcycle luggage and engine/bodywork protection systems TUV approved. Ren ...follow link for full description
[Click heading for more details]
We stock these frames made by Hepco & Becker to mount their luggage to the range of BMW`s. If the item is described as LUGGAGE FRAMES a rear top box mounting rack is included with the pannier side frames to which a Hepco top box can be fitted. If the item is described as REAR RACK STAND ALONE this means that this is only a rear top box mounting rack that can take a Hepco Top Box. If the item is described as PANNIER FRAMES then these are for p ...follow link for full description
[Click heading for more details]
BUY ONE OF THE WEST GERMAN KITS WITH A 100/80W HALOGEN BULB IN PLACE OF THE STANDARD HEADLAMP BULB.
[Click heading for more details]
Replaces standard on all twins. This unit is fitted by BMW to police specification 2v Twins and has been designed for riders using electrical accessories. It is also recommended for riders making short trips with lights on to keep the battery charged.
[Click heading for more details]
* CONSISTS OF LOW & HIGH HORNS WITH RELAY AND WIRING DIAGRAM. SIMPLE INSTALLATION. IMPORTED FROM ITALY FOR THE VERY MAXIMUM IN DECIBELS. FOR THOSE OCCASIONS WHEN YOU CANNOT AFFORD NOT TO BE NOTICED.
[Click heading for more details]
HT CABLES ARE A COMMON CAUSE OF IGNITION PROBLEMS AND SHOULD BE REPLACED AFTER 3 YEARS APPROXIMATELY.
[Click heading for more details]
With 2 keys.
[Click heading for more details]
Although production of of the KONI branded motorcycle shocks has ceased, IKON took over their production. They are mad almost entirely from the same components as before and used original production equipment. Therefore the performance and qulaities of the original KONI dial-a-rides are maintained.
[Click heading for more details]
Original W. German
[Click heading for more details]
100% Original
[Click heading for more details]
Although all Hepco & Becker luggage systems are "quick detachable" there may be times when you would prefer to leave the cases in situ. For this reason plus that extra touch of luxury and total protection for your luggage we highly recommend these inner bags made to the same high standards as the remainder of the luggage range by Hepco & Becker.
[Click heading for more details]
Original W. German
[Click heading for more details]
Glass not available separately.
[Click heading for more details]
For holding Speedo/Rev Counter Assemblies.
[Click heading for more details]
Even BMW acknowledge that the Italians now make some of the finest front forks available. These can be seen, courtesy of Mazorchi on some of the latest BMW`s. It stands to reason that they do not compromise on the fork seals employed. We have sourced top quality fork seals from Italy which we hope you will find to be cost effective replacements. NOTE: FORK SEALS ARE SUPPLIED AS A PAIR FOR 2 LEGS UNLESS STATED.
[Click heading for more details]
VISIT www.hepco-and-becker-luggage.co.uk TO SEE THE PANNIERS AND TOP BOX'S.
[Click heading for more details]
Capacities are shown per pannier. VISIT www.hepco-and-becker-luggage.co.uk TO SEE THE PANNIERS.
[Click heading for more details]
If "K100RS" is required use K100 (95350) with RS (95351) Likewise for K100RT/LT & K75RT
[Click heading for more details]
A common problem on all K series models is seizure of the clutch arm at the rear end of the gearbox. This is due to it's harsh operating environment and lack of provision for a grease point. Our exchange service replaces your old actuating arm for one that has renewed needle bearings and a stainless steel pivot pin and circlip. A grease nipple has been added for future maintenance. All clutch arms are bead blasted to look as new. We can send this ...follow link for full description
[Click heading for more details]
(Environment friendly components! ) Replaces original to allow continuous use of lead free petrol on all twins to 1985. Exhaust seats must be replaced. (1985 on BMW`s do not require converting.)
[Click heading for more details]
NOTE it is not essential to replace inlet seats in order to run on lead free petrol. However, as these components wear more rapidly than exhaust seats, it is sensible to replace these parts at the same time.
[Click heading for more details]
*Books not subject to VAT ALL PARTS ARE SINGLE ITEMS/QUANTITIES UNLESS OTHERWISE STATED. WHERE "ALL R1100" IT MEANS ALL R1100SE, RS, GS, RT, R1100R AS DOES "ALL R850" FOR 850cc TWINS.
[Click heading for more details]
All books are VAT free
[Click heading for more details]
SEE FUEL TANKS FOR FURTHER FUEL CAPS
[Click heading for more details]
* NOT R50/5. R60/5/6/7 PLEASE STATE SIZE REQUIRED WHEN ORDERING MAIN NEEDLE JETS
[Click heading for more details]
Kits contain all parts needed for normal 10,000 mile service (less oils). Specify model and year when ordering service kits and if oil cooler used. Service your BMW regularly to ensure reliability and protect your investment.
[Click heading for more details]
USING DONIT & REISEN FILTERSKits contain all parts needed for normal 10,000 mile service (less oils). Specify model and year when ordering service kits and if oil cooler used. Service your BMW regularly to ensure reliability and protect your investment.
[Click heading for more details]
Some items contain pressurised gas canisters and are not to be sold outside the UK. These items are marked:- NOT FOR SALE OUTSIDE THE UK
[Click heading for more details]
ALL SPEEDOMETERS ARE SUPPLIED IN MILES PER HOUR (MPH). NOTE: R80ST SPEEDO IS No Longer Available.
[Click heading for more details]
(ALL ITEMS ARE EACH UNLESS OTHERWISE SPECIFIED)
[Click heading for more details]
(RE-BADGED "IVEKA"). MOTO-METER are original equipment suppliers to BMW of high quality speedometers/ tachometers, fuel level sensors etc.
[Click heading for more details]
* NOT R50/5. R60/5/6/7 PLEASE STATE SIZE REQUIRED WHEN ORDERING NEEDLE JETS
[Click heading for more details]
Items that have recently been added to our inventory listing
[Click heading for more details]
100% ORIGINAL PARTS01950 CONSISTS OF: oil filter, gasket, drain and fill washer.01955 / 01960 / 01965 CONSIST OF: Above PLUS, Filter `O` Ring & Metal Shim01970 CONSISTS OF: Oil Filter, Gasket, `O` ring, Drain Washer and Fill `O` Ring.
[Click heading for more details]
OIL IS THE LIFE BLOOD OF YOUR ENGINE - DON`T RISK RE-USING WORN PARTS
[Click heading for more details]
Some items can not be sent outside the UK because the container is pressurised or contains a flammable liquid. These items are marked:- NOT FOR SALE OUTSIDE THE UK MAINLAND
[Click heading for more details]
All batteries (except GEL) are sent `dry charged` without acid. We are not allowed to send acid through the post. However, for batteries that are collected we have an acid filling service. GEL filled batteries are ready to fit.All batteries left completely discharged will die within days. Please ensure that they are maintained in a good state of charge over the winter months to preserve your guarantee and peace of mind.(BATTERIES FOR SALE TO UK O ...follow link for full description
[Click heading for more details]
All BMW original crash bar kits come complete with fixings and instructions.
[Click heading for more details]
60020A/60020 & 60030A/60030 CONSISTS OF 2 DIAPHRAGMS AND ALL PERISHABLE SEALS AND GASKETS TO OVERHAUL 2 CARBURETTORS. These high quality diaphragms were used by ROVER and are approved by SAAB. Made from Hydrin they last longer than Nitrile ones and are equivalent to the originals.
[Click heading for more details]
Paints- We stock a comprehensive range of genuine BMW touch up paints to cover up those annoying stone chips etc. Due to the metallic finish of most of the colour designs, the majority of these paints come as a touch up set of two sticks. Larger areas will require spray cans. BMW colours can be difficult to match even with the genuine paint. All paints come with instructions for use. Be certain that you know the colour code of your model before o ...follow link for full description
[Click heading for more details]
Paints- We stock a comprehensive range of genuine BMW touch up paints to cover up those annoying stone chips etc. Due to the metallic finish of most of the colour designs, the majority of these paints come as a touch up set of two sticks. Larger areas will require spray cans. BMW colours can be difficult to match even with the genuine paint. All paints come with instructions for use. Be certain that you know the colour code of your model before o ...follow link for full description
[Click heading for more details]
We stock these frames made by Hepco & Becker to mount their luggage to the range of BMW`s. If the item is described as LUGGAGE FRAMES a rear  top box mounting rack is included with the pannier side frames to which a Hepco top box can be fitted. If the item is described as REAR RACK STAND ALONE this means that this is only a rear top box mounting rack that can take a Hepco Top Box. If the item is described as ...follow link for full description
[Click heading for more details]
* LOCK BARREL & KEY (94598) NOT INCLUDED
[Click heading for more details]
Pinstriping stick on foil for tanks and mudguards available ex stock in gold/black/red/white/brown/green/silver/light blue
[Click heading for more details]
OIL CONTROL RING (WIDEST) FOR MOST STANDARD SIZE PISTONS (EACH) 9.00
[Click heading for more details]
100% Original BMW Pistons.Each piston comes with rings, gudgeon pin and circlips
[Click heading for more details]
All stainless steel spoke sets are provided with a complimentary set of 59430 nipples. Note all of these parts can be purchased individually.
[Click heading for more details]
Between spring & friction plate
[Click heading for more details]
First clutch cover under bolts.
[Click heading for more details]
These will give a firmer ride in all conditions. The coils of the progressive springs will prevent bottoming out and "nose droop".
[Click heading for more details]
RECENTLY INTRODUCED. REQUIRES WINDOWS 95/98. SELECTABLE IN ENGLISH,GERMAN, FRENCH, DUTCH, ITALIAN, & PORTUGUESE.
[Click heading for more details]
All the spares and parts you need for your R850/1100/1150/1200
[Click heading for more details]
Supplied with beading. These screens follow the same shape as the originals but are approximately 4-5 inches higher. Manufactured in France by Secdem from thick scratch resistant perspex. Approximate dimensions in inches HEIGHT X WIDTH. *FAIRING NEEDS DRILLING. NOT FOR USE WITH HAND PROTECTORS
[Click heading for more details]
Original W. German
[Click heading for more details]
THE FOLLOWING CONTINUOUS ROAD SPEED RATINGS APPLY:- S = UP TO 113mph, T = UP TO 118mph, U = UP TO 124mph, H = UP TO 130mph, V/VR = OVER 130mph, ZR = OVER 150mph. (TUBE) = TUBE MUST BE USED WITH THIS TYRE.UK CARRIAGE RATES FOR 1 TYRE = 5.00 (5.87 INC VAT), FOR 2 TYRES 5.95 (6.99 INC VAT)
[Click heading for more details]
(Top quality made in Holland)
[Click heading for more details]
Note all non /5 Rocker arms are supplied with needle bearings. Important note - Rocker Arms used between 1976 and 1984 are no longer available from BMW. The later types 09310 & 09320 should be used instead and shimmed correctly using a selection of the metal shims from the 'ROCKER PARTS 1985 ON SECTION'.These shims are not recommended for earlier arms.
[Click heading for more details]
Important note- Rocker Arms used between 1976 and 1984 are no longer available from BMW. The later types 09310 & 09320 should be used instead and shimmed correctly using a selection of the above metal shims.These shims are not recommended for earlier arms.
[Click heading for more details]
Locks not included
[Click heading for more details]
* HIGH QUALITY WATERPROOF FOAM FROM ITALY TO INSULATE AGAINST VIBRATIONS. NOT FOR USE WITH HEATED GRIPS. AS USED BY BMW ON LATER K100RT THESE SIMPLY ATTACH TO THE HANDLEBAR ENDS TO REDUCE VIBRATIONS AND MIRROR BLUR. MADE BY TELEFIX IN GERMANY.
[Click heading for more details]

[Click heading for more details]
UK made, same finish as original.
[Click heading for more details]
With 2 keys.
[Click heading for more details]
FOR FURTHER DETAILS, SIZES PHOTOGRAPHS ETC. SEE WWW.SECDEM.FR SELECT, CATALOGUE, BMW AND YOUR MODEL FROM THE SECDEM MENU.
[Click heading for more details]
* THESE UNITS REPLACE THE ORIGINALS WITH UNITS OF A SIMILAR OR HIGHER SPECIFICATION WHILST REPRESENTING GOOD VALUE FOR MONEY. ALL ARE FULLY GUARANTEED FOR ONE YEAR.
[Click heading for more details]
Self adhesive stickers.
[Click heading for more details]
SIDE PANELS/BATTERY COVERS. LOCATED ON THE SIDE OF THE MACHINE.
[Click heading for more details]
Stainless Steel. Includes nut and bolt.
[Click heading for more details]
We are stockists of these high quality silencers. Sito are situated in Italy and make 600,000 after market silencers per year to superior spec. for over 200 different models. We believe that they are a considerable improvement on the originals. They use thicker chromed steel and the internal silencer assembly is kept completely separate from the external skin. The internals are coated with melamine to prevent any condensation on cold spots from c ...follow link for full description
[Click heading for more details]
2V TWINS SPECIAL CLEARANCE ITEMS
[Click heading for more details]
ALL SPEEDOMETERS ARE SUPPLIED IN MILES PER HOUR (MPH)
[Click heading for more details]
ALL SPEEDOMETERS ARE SUPPLIED IN MILES PER HOUR (MPH)
[Click heading for more details]
All items are each unless otherwise specified.
[Click heading for more details]
We feel privileged to make these (locally made in Lincolnshire) superb stainless steel parts available. Every item has been individually finished. Do not confuse these with mass produced stainless fasteners! In all cases where washers and nuts are called for in the specific application, these are supplied with the bolt at no extra cost. Many more stainless steel items are listed under the relevant sections and are printed in bold. We stock many m ...follow link for full description
[Click heading for more details]
BRAIDED STAINLESS STEEL FLEXIBLE BRAKE HOSES FOR ABS AND NON ABS MACHINES. TO REPLACE ORIGINAL RUBBER FLEXIBLE BRAKE HOSES.
[Click heading for more details]
A selection of the most popular stainless steel braided hoses. All remaining stainless steel hoses in stock at 17.00 excl VAT, 19.97 incl VAT. (CONTACT 01775-680881 or Email sales@motobins.co.uk TO CHECK ON AVAILABILITY FOR YOUR BMW MACHINE IF NOT LISTED BELOW)
[Click heading for more details]
* NOTE: END TRUNION OF ORIGINAL ROD NEEDS SOLDERING ONTO STAINLESS STEEL ROD
[Click heading for more details]
Made to the highest standards in the UK by Keihan, these stainless steel look alike replacements produce the same output and sound as the originals. They carry a 10 YEAR manufacturer`s guarantee and will certainly increase the value of your BMW.  To determine the size of your down pipes/silencers apply this rule only if your silencers are original. You have a 38mm system if the silencer clamps are marked `40'.  You have a 40mm s ...follow link for full description
[Click heading for more details]
Supplied with beading. These are clear screens made to the same height and shape as the original.
[Click heading for more details]
Do not be left out in the dark! Kits containing headlight and all other bulbs and fuses in a strong plastic box for storage in tool tray. Made in West Germany. An essential spare to carry! - Compulsory overseas!
[Click heading for more details]
Starter Motor 1977-87 is no longer available but can be replaced by the later new 1988 on Valeo 71020 starter motor and we have an exchange service for both early 1970-76 and 1977 Bosch starter motors. The 1970-74 Bendix is now also NLA from BMW.
[Click heading for more details]
With 2 keys.
[Click heading for more details]
BMW original
[Click heading for more details]
VINYL UK MADE
[Click heading for more details]
*CABLES SUPPLIED WITH RUBBER BOOT FOR CARBURETTOR END ADJUSTER
[Click heading for more details]
* WITH COMPLETE BRAKE MASTER CYLINDER & RESERVOIR
[Click heading for more details]
(/5 1970-73 IS NLA)
[Click heading for more details]
TYRE APPLICATIONS PART NUMBER LIST.F = FRONT. R = REAR ALL TWINS /5/6/7 1970-84 (NOT R45/65, R80G/S & ST. F 40004. R 40041. R45/65 1978-84 & R65LS. F 40014. R 40041. R80ST 1981-84. F 40022. R 40045. R80G/S 1981-87. F 40010. R 40044. 1985 ON 2v TWINS:- R65, R80, R80RT, R100RS/RT. F 40014. R 40045. R80GS & R100GS 1988 ON (PARALEVER). F 40026. R 40055. ALL K100/RS/RT/LT (NOT 16 VALVE). F 40018. R 40051. K75 1985-89. K75C (REAR  ...follow link for full description
[Click heading for more details]
100% ORIGINAL
[Click heading for more details]
TWO REQUIRED PER WHEEL
[Click heading for more details]
SPOKED WHEELS ONLY.
[Click heading for more details]
EACH WHEEL HAS TWO OIL SEALS. REAR WHEELS HAVE DISSIMILAR OIL SEALS
[Click heading for more details]
100% ORIGINAL
[Click heading for more details]
FOR TYRES SEE  Click here to view Tyres.
[Click heading for more details]
As above but with the 60/50W Xenon light bulb substituted for the original. This bulb gives a claimed 30% increase in brightness. 100% legal
[Click heading for more details]
The new aluminium case from Hepco & Becker: Xplorer Extremely endurable combination of anodised aluminium sheet and coloured shock-resistant artificial material New, modern, actual design, many fastening possibilities for luggage straps, top loading concept.    
[Click heading for more details]